Aerospace Engineer Resume Examples
Create your perfect Aerospace Engineer resume
Tailor a job-specific resume and cover letter for every application.
Three aerospace engineer resumes: an Aerospace Engineer I in rocket propulsion manufacturing, an Aerospace Engineer in defense aircraft modification, and a Senior Aerospace Engineer in commercial aircraft. Each one is tailored to one job posting. Read them here, or download any of them as a PDF.
All three follow the same layout. Key qualifications come first, so a recruiter can tick them off against the posting, then the work history, with the most detail on the latest job. In our blind test with 20 recruiters, this layout was shortlisted in 12 of 13 sessions, against 3 for a two-column template. Why this format works explains the reasoning. The people and their results are invented.
Entry-level Aerospace Engineer resume
Use class projects and lab work that match the posting, like CAD parts and drawings, simple FEA and hand checks, and test support. For each project, say what you built or analyzed, the constraints, the tools, and what changed.
Jalen Cervantes
Torrance, CA · jalen.cervantes@example.com · (310) 555-0125 · linkedin.com/in/example-jalen-cervantes
My Key Qualifications
- U.S. person (citizen), eligible for export-controlled hardware and data access.
- Builds 3D models, drawings, and assemblies in SolidWorks daily at Ursa Major, including 14 drawing updates released across 3 propulsion assemblies in one change cycle.
- First-pass thermal and structural analysis in MATLAB and ANSYS at Ursa Major, catching 2 support locations that exceeded allowable temperature assumptions before fabrication.
- Test support on live propulsion hardware: prepped 9 instrumentation channels for hot-fire testing and cut post-test reporting from 3 days to 2 by standardizing the report template.
- CubeSat structures capstone in Siemens NX and NASTRAN, cutting predicted structural mass 11% while holding a 1.25 safety factor against launch loads.
- Thermal vacuum exposure from a campus lab fixture project that trimmed avionics board setup from 45 minutes to 28 minutes across repeat runs.
- Coursework spanning structures, thermodynamics, fluid mechanics, and orbital mechanics from a B.S. in Aerospace Engineering at Cal Poly San Luis Obispo.
Experience
Aerospace Engineer I — Ursa Major, US rocket propulsion manufacturer for launch and hypersonics programs
Nov 2025 – Present · 1 yr
- Supports mechanical design, first-pass analysis, and development testing for liquid rocket engine hardware in a production-focused engineering team.
- Released 14 drawing updates across 3 assemblies in one release cycle, revising SolidWorks models for injector and feed-system brackets and routing changes through configuration-controlled engineering change requests.
- Performed first-pass thermal and structural checks on test hardware supports using MATLAB hand-calculation comparison and ANSYS FEA with documented loads and boundary conditions, identifying 2 locations exceeding allowable temperature assumptions before fabrication.
- Assisted with hot-fire test preparation and post-test data review for propulsion components, preparing 9 instrumentation channels and cutting reporting turnaround from 3 days to 2 days for one test series.
Education
- California Polytechnic State University, San Luis Obispo — Bachelor of Science in Aerospace Engineering · 2021 – 2025 · Relevant coursework: Aircraft Structures, Orbital Mechanics, Thermodynamics, Fluid Mechanics, Experimental Methods in Aerospace Engineering
Projects
- CubeSat Primary Structure Capstone
Designed and analyzed an aluminum CubeSat primary structure for a university mission concept, targeting launch-load survival and mass constraints. Reduced predicted structural mass by 11% while meeting a 1.25 safety factor in final analysis.
Tech: Siemens NX, NASTRAN, MATLAB
- Thermal Vacuum Test Fixture for Campus Lab
Developed a fixture and test procedure for a campus aerospace lab to hold and instrument small avionics boards during benchtop thermal vacuum evaluations. Cut setup time from 45 minutes to 28 minutes during repeat lab runs.
Tech: SolidWorks, Python, GD&T
Skills
- CAD & Design: SolidWorks, Siemens NX, GD&T
- Analysis: MATLAB, Python, ANSYS, NASTRAN, Structural Analysis, Thermal Analysis
- Test & Engineering Tools: Test Engineering, Technical Documentation, Git, Jira
Sample resume made with Specific Resume · specificresume.com
Mid-level Aerospace Engineer resume
Lead with what you own in your current program, like requirements and verification, design releases, analyses, and test support, with clear outcomes. Drop school projects, and keep education to one line unless it is required for clearance.
Renee Hollis
Madison, AL · renee.hollis@example.com · (256) 555-0190 · linkedin.com/in/example-renee-hollis
My Key Qualifications
- Closed 118 requirements with 100% bidirectional traceability in DOORS for an aircraft mission-equipment modification package, ahead of critical design review.
- Structural and performance analyses in MATLAB, Python, and ANSYS supporting design and qualification decisions on military aircraft modifications.
- Ground and flight test support with data reduction, anomaly resolution, and verification against limits; cut post-flight data reduction from 5 days to 3 with Python automation.
- Technical coordination with manufacturing, quality, suppliers, and program management; closed 16 change requests and nonconformance dispositions across 2 increments.
- Creo CAD ownership on modification programs, including 26 drawing revisions across 4 shipsets released before production handoff.
- Root-cause reviews using fishbone-based methods to drive corrective actions on fielded hardware discrepancies.
Experience
Aerospace Engineer — Dynetics, Huntsville defense and aerospace contractor within Leidos
Apr 2023 – Present · 3 yrs 7 mos
- Built and baselined subsystem requirements and verification crosswalks in DOORS for an aircraft mission-equipment modification package, closing 118 requirements with 100% bidirectional traceability ahead of critical design review.
- Completed structural assessments of equipment rack and bracket installations on a modified aircraft interior, running load cases in ANSYS and checking margins with MATLAB post-processing. Resolved 7 analysis findings before release with no late redesign to the final drawing package.
- Supported a combined ground and flight test event for integrated mission hardware, automating Python scripts for channel cleanup, time alignment, and summary plots against verification limits. Cut post-flight data reduction time from 5 days to 3 days.
- Led technical coordination on manufacturing concessions and fielded hardware discrepancies, closing 16 change requests and nonconformance dispositions across 2 program increments using fishbone-based root-cause reviews with quality and production teams.
Mechanical Design Engineer — Sierra Nevada Corporation, aerospace and national security contractor for aircraft and mission systems
Nov 2021 – Mar 2023 · 1 yr 4 mos
- Released installation drawings and interface details for aircraft mission equipment packages, completing 26 drawing revisions across 4 shipsets before production release by coordinating interface dimensions with manufacturing and incorporating fit-check redlines.
- Supported environmental and functional qualification testing of installed hardware, writing 12 test procedures and reports and verifying measured responses against requirement limits.
- Developed MATLAB worksheets for tolerance and load-tracking calculations that cut recurring analysis preparation time by 6 hours per design iteration.
- Prepared engineering reports, interface control documents, and change documentation supporting aircraft modification programs.
Education
- Embry-Riddle Aeronautical University — Bachelor of Science in Aerospace Engineering · 2017 – 2021
Skills
- Analysis Tools: MATLAB, Python, ANSYS
- CAD & Requirements: Creo, DOORS
- Engineering Methods: Requirements Management, Verification Planning, Structural Analysis, Flight Test Support, Root-Cause Analysis
Sample resume made with Specific Resume · specificresume.com
Senior Aerospace Engineer resume
Lead with system or subsystem ownership, certification or compliance work, supplier decisions, and how you run reviews and close nonconformances. Keep the most detail on the last few roles, and compress older jobs to brief scope and domain.
Malcolm Vasquez
Everett, WA · malcolm.vasquez@example.com · (425) 555-0166 · linkedin.com/in/example-malcolm-vasquez
My Key Qualifications
- 11 years in aerospace engineering, from component qualification at Moog through senior-level aircraft systems ownership at Boeing.
- Technical ownership of aircraft system installations from architecture through certification, production support, and in-service resolution at Boeing.
- Led requirements and verification for a major system installation change: 186 verification points closed before certification test entry, aligned to FAA Part 25 and DO-160.
- Directed structural and loads assessments using MATLAB, Python, and NASTRAN, cutting open analysis actions from 23 to 4 before final design review.
- Supplier engineering focal point at Boeing: reviewed supplier designs, approved technical data packages, and cut technical query turnaround from 10 days to 6.
- Investigations in 8D and FMEA across commercial and spaceflight programs, including an 8D closed in 28 days with no recurrence across 15 shipsets.
- Mentors early-career engineers and leads design reviews, test readiness reviews, and corrective action efforts.
Experience
Senior Aerospace Engineer — Boeing
Jul 2021 – Present · 5 yrs 4 mos
- Owned the requirements and verification strategy for a major aircraft system installation change across design, lab verification, and production release, building the compliance matrix around FAA Part 25 and DO-160 expectations and closing 186 verification points before certification test entry.
- Directed multidisciplinary structural and loads assessments for installation hardware and airframe interfaces, using MATLAB and Python for load post-processing and NASTRAN for finite element evaluation, cutting open analysis actions from 23 to 4 before final design review.
- Served as engineering focal point for supplier-released installation assemblies with recurring documentation and fit issues, instituting a standard review checklist in Teamcenter and weekly closure reviews that cut supplier technical query turnaround from 10 days to 6.
- Led a high-impact nonconformance investigation affecting production installation sequencing, coordinating fault isolation and fishbone review with manufacturing and quality engineering; closed the 8D in 28 days with no recurrence across the next 15 shipsets.
- Mentored 6 early-career engineers on analysis and certification documentation, creating reusable report templates and weekly technical coaching that shortened average review rework from 3 cycles to 2.
- Run cross-functional coordination with systems, manufacturing, quality, supply chain, certification, and flight-test teams, and lead design reviews, test readiness reviews, and corrective action efforts.
Aerospace Engineer — Blue Origin, private aerospace company developing launch vehicles and space systems
Mar 2017 – Jun 2021 · 4 yrs 3 mos
- Owned mechanical design and analysis for flight hardware from concept through qualification support, including development testing and production support for integrated assemblies.
- Led design and analysis updates for a flight hardware assembly following qualification test findings, closing 9 corrective design actions before the next build lot by revising CATIA models, re-running NASTRAN load cases, and releasing changes through controlled workflows.
- Supported root-cause closure on recurring hardware nonconformances during build and integration, applying FMEA-informed failure reviews with manufacturing and quality teams and cutting repeat discrepancies from 6 per quarter to 2.
- Developed Python and MATLAB post-processing scripts for vibration and thermal environmental test data, automating sensor parsing, limit checks, and summary plots to save 12 hours of data reduction per test campaign.
Mechanical Engineer II — Gulfstream Aerospace
Jul 2014 – Feb 2017 · 2 yrs 7 mos
- Released drawing and model updates for aircraft interior installation hardware, completing 31 released revisions across 5 engineering change packages by updating CATIA geometry, incorporating shop feedback, and coordinating release through PLM controls.
- Supported certification documentation for interior hardware changes, submitting 14 compliance artifacts on schedule by compiling analysis summaries, test references, and traceability evidence with senior certification engineers.
Project Engineer — Moog, motion control and actuation supplier for aerospace and defense systems
Jul 2012 – Jun 2014 · 1 yr 11 mos
- Organized verification evidence for electromechanical component qualification packages, completing 8 qualification document sets for customer submission by tracking required test and analysis artifacts and standardizing report formatting with the test team.
Education
- Pennsylvania State University — Bachelor of Science in Aerospace Engineering · 2008 – 2012
Skills
- CAD & PLM Tools: CATIA, Teamcenter
- Analysis & Simulation: NASTRAN, MATLAB, Python, Fluent
- Compliance & Methods: Requirements Management, Validation & Verification, FAA Part 25, DO-160, FMEA, 8D Root-Cause Analysis
Sample resume made with Specific Resume · specificresume.com
Make one for your own posting
Each resume here was written for one posting, and yours should be too. The checklist from our blind test covers what to check before you send it.
